clutch switch bypass 96 s-10

i got 4 wires, 1 is not active until the clutch is pressed, then it grounds until cranking in which it goes hot one is ground at all times one is hot at all times and the las one is ground until cranking, then it goes hot. please help

Most likely the one that does nothing until the clutch is pressed and then goes hot during crank it the one you are looking for. to test it, turn the ignition on, an dthen take a FUSED lead and apply 12 volts + to the wire in question. If the car starts, then thats the wire you need. Just take the starter wire from the remote start drectly to it instead of at the ignition switch. Make sure the car is in neutral when you do this or you might die. Thats a heavy price to pay for convienience.Northstart.....or start it your damn self.

is it legal for CC to install a RS on a standard in OK?

if you have a PURPLE / white wire at the clutch switch, this is your starter wire. done