1999 Ford Windstar, sliding power door

Home / the12volt's Install Bay / Car Security and Convenience / 1999 Ford Windstar, sliding power door (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

anwarshah

Member - Posts: 3

Joined: September 11, 2005

Location: United States

Posted: December 27, 2005 at 10:29 AM / IP Logged

What is a possible solution to the sliding Power door not closing when the door switch is used? The vehicle is Ford Windstar Van 1999. I did exchange the switch from the drivers side to check if the switch was faulty, but not so. The door which does not work is the passenger side. The sliding door only opens with power but not close. Manually operated there is no problem. Any suggestions?

sabir

Back to Top

supercruiser

Member - Posts: 17

Joined: December 26, 2005

Location: United States

Posted: December 27, 2005 at 10:40 AM / IP Logged

Is there a sensor to prevent it from closing on a person, that might be the problem.

Jeff

Water collects in low spots

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 Ford Windstar, sliding power door

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.