Nitro BMW Alarm

Home / the12volt's Install Bay / Car Security and Convenience / Nitro BMW Alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rhelton075

Member - Posts: 7

Joined: January 03, 2006

Location: United States

Posted: January 04, 2006 at 9:39 PM / IP Logged

I Recently purchased a nitro alarm made by berlin mobile westex , and i am trying to figure out how to install it on a 99 caviliar with out keyless entry. I was wondering how to hook up the bypass module with this alarm since it is not a DEI alarm. If anyone can help i would appreciate it. This is the only thing I can not figure out on the alarm.

thumppin3

Member - Posts: 5

Joined: February 06, 2006

Location: United States

Posted: February 11, 2006 at 8:10 AM / IP Logged

since you already installed one of these can you help me? do i need to hook up both white wires to my lights? do i really need to hook up the alternator wire to the alternator? is the shock sensor really sensitive?

thanks for any help

thumppin

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Nitro BMW Alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.