Alpine 8027A Remote Programming

Home / the12volt's Install Bay / Car Security and Convenience / Alpine 8027A Remote Programming (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bluespecv03

Member - Posts: 4

Joined: January 17, 2006

Posted: January 17, 2006 at 5:00 PM / IP Logged

I have the alarm installed on my new car, but its missing remotes. I bought new ones, but I have no idea how to program. Help! I have the 8426A remotes.

Back to Top

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: January 17, 2006 at 6:17 PM / IP Logged

You need to open the main alarm unit up to access the coding switch. Press and hold the valet switch. Immediatley press and release the coding switch inside the security system (It is a push button switch on the circuit board on the opposite side of the board with the plugs) DO NOT let go of the valet switch. The LED will begin to flash rapidly. Press the TX button of the new remote. The siren will chirp twice to indicate the remote has been programmed. Press the Tx button on another remote if you have more than one to program to learn it. When done, release the valet switch to end the transmitter learning sequence.

sparky

Back to Top

bluespecv03

Member - Posts: 4

Joined: January 17, 2006

Posted: January 17, 2006 at 7:26 PM / IP Logged

Thanks for your help, sounds easy enough to me!

Back to Top

bluespecv03

Member - Posts: 4

Joined: January 17, 2006

Posted: January 20, 2006 at 4:57 PM / IP Logged

The 8426a remotes are discontinued. Are there any other compatible remotes?

Back to Top

lottathought

Member - Posts: 1

Joined: April 17, 2006

Location: United States

Posted: April 19, 2006 at 1:22 AM / IP Logged

This may be a very stupid question but I guess that is just where I am at.

I have the Alpine SEC-8027a security system in the car that I just bought.

The previous owner also gave me two 8426a remotes that he was never able to program. (He never could find the main box)

I have found the main box. I know where the coding button is inside the main box.

I am just missing on peice to the puzzle in getting these remotes programmed.

What is the valet switch?

I have scoured the security system. There is nothing that you can flip or press inside the main box except the coding button.

The only thing that l can find outside the box is the key that you can pull out to disable to start of the car.

It does have a button on it but pressing this button does not seem to do anything and it did not allow me to program the remotes.

I have been trying to figure this out for 2 solid weeks and I am pulling my hair out.

Can somebody please throw me a bone here and point me to the valet switch?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alpine 8027A Remote Programming

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.