clifford intelli start

Home / the12volt's Install Bay / Car Security and Convenience / clifford intelli start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: January 20, 2006 at 3:58 PM / IP Logged

here is a quick one. i'm doing an intellistart tomorrow adding it onto an arrow 5.

can i extend the wizzard cable i presume its a multiplex cable and don't wanna mess is up by adding resistance or anything

Why oh Why didn't i take the blue pill

Darren Power

scirocco16v

Copper - Posts: 112

Joined: October 27, 2003

Posted: January 20, 2006 at 5:37 PM / IP Logged

I have extended them before with no problem. I don't know if it makes a difference and i didn't want to find out, but i made sure to not cross up the wires. In other words makes sure the same wire goes to the same pin as it did before it was cut and of course solder and shrinkwrap

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: January 20, 2006 at 7:17 PM / IP Logged

i was gonna solder for sure. just was a little weary because its multiplex. its my first is4 done other remote starts just not the clifford ones looks handy enough.. anything that i should know or be aware of.

Why oh Why didn't i take the blue pill

Darren Power

scirocco16v

Copper - Posts: 112

Joined: October 27, 2003

Posted: January 20, 2006 at 11:22 PM / IP Logged

Should be no problems, post again if you have other questions.

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: January 21, 2006 at 7:05 AM / IP Logged

ok gonna start now in a few mins.

the one thing thats confusing me is the manual trans safe start.

its says park.

without touching brake pedal transmit chanel 11(levelshift button twice, then button 3) on the radar two remote or other combination on the remote assigned to you by your dealer.

the alarm is an arrow 5 and looking at the wizzard a can program teh buttons on the remote to manual trans/autostart is this the level shift.

i'm gonna do the install now so hopefully someone can enlighten me for later on

Why oh Why didn't i take the blue pill

Darren Power

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: January 21, 2006 at 1:13 PM / IP Logged

all done didn't need to do any safety thing start when unarmed too which its not supposed to dunno why that is. i have split parking light indicators each side and it illuminates them while remote started. says it doesn't do that on uk models. but it does is this programmable.

otherwise its all working and starting every time.

Why oh Why didn't i take the blue pill

Darren Power

scirocco16v

Copper - Posts: 112

Joined: October 27, 2003

Posted: January 21, 2006 at 7:53 PM / IP Logged

Is the car a manual? If it is then do not ground the BLACK/ green wire!!!! This will force you to do a manual trans safestart when leaving the car and prevent the car from starting in gear. That button combination will not be set on a arrow and requires you to program one through the wizard. If you do not ground the wire it will also prevent the car from starting unarmed. Parking lights are not programmable

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: January 21, 2006 at 8:07 PM / IP Logged

cool that explains all the things i needed to know. but why does it tell you to groung the BLACK/ green for manual trans.

Why oh Why didn't i take the blue pill

Darren Power

scirocco16v

Copper - Posts: 112

Joined: October 27, 2003

Posted: January 21, 2006 at 11:17 PM / IP Logged

the instructions are wrong

Powermyster

Silver - Posts: 962

Joined: April 06, 2005

Location: Ireland

Posted: January 22, 2006 at 5:30 AM / IP Logged

lol thats lovely. making more sense now..

Why oh Why didn't i take the blue pill

Darren Power

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

clifford intelli start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.