02 PT Cruiser disarm

Home / the12volt's Install Bay / Car Security and Convenience / 02 PT Cruiser disarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: February 09, 2006 at 5:01 PM / IP Logged

i know it arms/disarms with lockunlock through resistors, but for disarm no unlock it says to single pulse the unlock wire. does it need to single pulse through a 7.2K resistor or just straight ground? haven't touched a cruiser before

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: February 09, 2006 at 5:25 PM / IP Logged

A negative pulse through a 7.2k ohm resistor will disarm on the first pulse and unlock the doors on the second. You must use a relay to provide a true ground for the circuit to work.

sparky

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: February 09, 2006 at 8:03 PM / IP Logged

just looking for the disarm no unlock to remote start. hoped that the status out through a resistor would work but guess not then. not strong enough ground to just disarm eh?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

02 PT Cruiser disarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.