1999 Mustang + Autopage install

Home / the12volt's Install Bay / Car Security and Convenience / 1999 Mustang + Autopage install (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gpgtp00

Copper - Posts: 81

Joined: April 11, 2002

Location: United States

Posted: December 28, 2002 at 11:07 PM / IP Logged

Heres the deal... im installing a AutoPage Rs-750LCD model alarm/Remote Start on a 1999 Mustang. What Ide like to know is... a: what type of door locks is on this car and is there a way to bypass the Vats on this car? I looked at the wiring diagram, but it didnt say what type of locks it is. Normally it says on the bottom of the diagram wether its positive, negative, etc. Thanks in advance.

Back to Top

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: December 28, 2002 at 11:19 PM / IP Logged

Ford

Mustang

1999-2003

Remote Starter Wiring Colors and Notes
Function		Vehicle Color	Location
Start:		WHITE/ PINK	IGNITION SWITCH HARNESS *
Ignition #1:		RED / GREEN	IGNITION SWITCH HARNESS
Ignition #2:		RED / BLACK	IGNITION SWITCH HARNESS ***
Ignition #3:		GRAY / YELLOW-2WIRES	IGNITION SWITCH HARNESS * **
Accessory:		BLACK/ LT. GREEN	IGNITION SWITCH HARNESS
Brake Light:		RED / L GREEN (+)	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:		ORANGE / WHITE	PIN #48 AT POWERTRAIN CONTROL MODULE **
Parking Lights:		BROWN (+)	AT HEADLIGHT SWITCH
Headlights:		RED / YELLOW (+)	AT HEADLIGHT SWITCH
OEM Alarm Disarm:		D GREEN/ PURPLE (-)	BLACK 12 PIN CONN. DR. KICK PANEL
OEM Alarm Arm:		N/A
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* Powertrain Control Module Located In Passenger Kick Panel. Most Models Are Equipped With Ford's PATS Anti-Theft System - Use Universal Alarm Bypass Module. * See Note #211 - Ford Ignition Switch Connection Diagram. ****All DesignTech remote starters except the 2xx22 have an ignition 3 output - it is the WHITE/ black in the 'control harness.' This wire will be used to control a relay which powers ignition 3. The wire will also be connected to a bypass module, if needed.

Ford

Mustang

1999-2003

Alarm and Keyless Entry Wiring Colors and Notes
Function		Vehicle Color	Location
Constant +12 Volts:		GREEN/ PURPLE	IGNITION SWITCH HARNESS
Starter Kill:		WHITE/ PINK	IGNITION SWITCH HARNESS *
Ignition +12 Volts:		RED / GREEN	IGNITION SWITCH HARNESS
Dome Lights/Superv:		BLACK/ WHITE	AT BCM ABOVE DRIVER'S KICK PANEL
OEM Horn:		PURPLE / ORANGE (-)	STEERING COLUMN HARNESS
Power Lock:		LT. GREEN	12 PIN BLACK CONNECTOR *****
Power Unlock:		PURPLE	HIGH IN DRIVER OR PASS. KICK PANEL
Trunk Release:		PURPLE / YELLOW (+)	AT TRUNK RELEASE SWITCH
Alarm Input Wire:		BLACK/ WHITE	AT BCM ABOVE DRIVER'S KICK PANEL
Notes:	** With OEM Keyless Entry Dome Light Wire Is GRAY (+) In 12 Pin Gray Connector In Driver Kick Panel. **** Without OEM Keyless Entry See Note #203 - Reverse Polarity Door Lock Diagram, With OEM Keyless See Note #202 - Positive Pulse Door Lock Diagram.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 Mustang + Autopage install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.