the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1995 bmw 5-series keyless


Post ReplyPost New Topic
< Prev Topic Next Topic >
Fastlearner 
Silver - Posts: 346
Silver spacespace
Joined: March 23, 2005
Location: United States
Posted: February 20, 2006 at 7:59 PM / IP Logged  
Just curious as to the lock and unlock wires. I read the directechs sheet and it stated that the lock/unlock wires do not change state when testing. So I was curious as to how i test these wires.
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: February 20, 2006 at 9:09 PM / IP Logged  

BMW 3, 5 and 7 series for 1992 to 1998 have a pre-wired factory security connector that can be useful when addingafter-market accessories such as alarms and keyless entry systems. On the 3 series this connector can be found behindthe glovebox near the center console. On the 5 series it can be found either in the same location as the 3 series, orunder the back seat near the battery. On the 7 series this connector can be found near the brake pedal under the passenger side dash. The layout for this connector is as follows:

PIN FUNCTION WIRE COLOR POLARITY

1. 12 Volts constant RED / gray +

2. Ignition PURPLE / white –

3. Ground Brown -

4. Drivers door trigger BROWN / gray -

5. Passenger door trigger BROWN / blue -

6. Rear door trigger BROWN / purple -

7. Horn trigger BLACK/ blue +

8. NOT USED

9. Lock trigger* WHITE/ red +

10. Unlock trigger* Blue/red +

11. Trunk trigger BROWN / white -

12. NOT USED

* These wires must be tested with all the doors closed or the doorlocks will not respond.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Fastlearner 
Silver - Posts: 346
Silver spacespace
Joined: March 23, 2005
Location: United States
Posted: February 20, 2006 at 9:14 PM / IP Logged  
Thanks, i'm heading home for tonight. Will continue in the morning. If i have any problems i'll post them.
alarmsellout 
Member - Posts: 5
Member spacespace
Joined: December 12, 2005
Location: United States
Posted: February 27, 2006 at 4:53 PM / IP Logged  
Any idea about a 1987 325i Convertable? I am trying to figure out how to connect a keyless entry kit.. Are there any harnesses on that year model that does the same thing?
-Greg
Greg

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer