the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

AutoLok VIP, 1999 Dodge Caravan


Post ReplyPost New Topic
< Prev Topic Next Topic >
323cid 
Member - Posts: 4
Member spacespace
Joined: October 17, 2002
Location: Canada
Posted: February 27, 2006 at 9:32 AM / IP Logged  
I have a 1999 Dodge Caravan with the AuoLokVIP installed.
The unit was in the vehicle when I bought it. Problem is that the dealer didn't have the codes so they have it unhooked.
Tried plugging it back in and tried the master code to reset it, no luck. Any suggestions would be greatly appreciated. Thanks
mrcllusb 
Copper - Posts: 489
Copper spacespace
Joined: September 06, 2005
Location: Georgia, United States
Posted: February 27, 2006 at 9:43 AM / IP Logged  
So you tried the factory master code from the manual?
"ole blake"
323cid 
Member - Posts: 4
Member spacespace
Joined: October 17, 2002
Location: Canada
Posted: February 27, 2006 at 9:47 AM / IP Logged  
Factory manual = 747#
mrcllusb 
Copper - Posts: 489
Copper spacespace
Joined: September 06, 2005
Location: Georgia, United States
Posted: February 27, 2006 at 10:16 AM / IP Logged  
No that's the access code..You enter that first then the master code..
"ole blake"
mrcllusb 
Copper - Posts: 489
Copper spacespace
Joined: September 06, 2005
Location: Georgia, United States
Posted: February 27, 2006 at 10:19 AM / IP Logged  
Try this and tell me if it works.First 747# then 1111*,01# then your new 4 number code then *
"ole blake"
323cid 
Member - Posts: 4
Member spacespace
Joined: October 17, 2002
Location: Canada
Posted: February 27, 2006 at 10:52 AM / IP Logged  
Tried as per inst. 747# gives a steady red next steps give flashing red with no luck.
Question? With key on or off?
mrcllusb 
Copper - Posts: 489
Copper spacespace
Joined: September 06, 2005
Location: Georgia, United States
Posted: February 27, 2006 at 10:59 AM / IP Logged  
The light starts flashing red when the system has been activated.It activates 15sec after the engine is turned off.Try this.Let the system arm,then go thru the steps to try and change the code,without the key on..
"ole blake"
323cid 
Member - Posts: 4
Member spacespace
Joined: October 17, 2002
Location: Canada
Posted: February 27, 2006 at 11:28 AM / IP Logged  
Received code from dealer. Old code works, Yea.
Next I will find a way to put new codes in as I didn't have any luck changing them.
Thanks for the help. Great fourm.
mrcllusb 
Copper - Posts: 489
Copper spacespace
Joined: September 06, 2005
Location: Georgia, United States
Posted: February 27, 2006 at 4:47 PM / IP Logged  
You're welcome anytime..
"ole blake"

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer