door lock interface

I installed a hornet 564t alarm/starter in my 2005 honda pilot. I used a pkh3 bypass and a HODL doorlock module. The alarm and the starter work fine. I am having a problem with the door locks. The doors do not lock when I arm the alarm. When I disarm the locks open. I installed the brown wire to the violet in the alarm, the red to power, the black to negative, the blue unlock to thr blue unlock in the alarm and the green unlock to the green in the alarm. the violet from the module to the brown data in fuse block and the violet/white to the green orange on the fuse block. the two pink were not used.  I will appreciate any help. Thank you.

i would double check to make sure the wire u tapped for unlock is the correct wire.

sorry i meant lock wire