python 3000esp in 92 lexus sc300

Home / the12volt's Install Bay / Car Security and Convenience / python 3000esp in 92 lexus sc300 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

junko

Member - Posts: 2

Joined: March 06, 2006

Location: United States

Posted: March 06, 2006 at 10:19 PM / IP Logged

i plan on installing a python 3000esp in my 1992 lexus sc300. it have a factory alarm. do i just disconnect the oem alarm module and just tap into the existing wiring from the factory?? anything special i need for the install?? relay, diodes,etc...?? im just doing a basic set-up, lock/un-lock, trunk popper, hood and trunk pins. thanks

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: March 06, 2006 at 10:48 PM / IP Logged

Factory Alarm Arm | common with lock

Factory Alarm Disarm | green | - | driver kick panel

junko

Member - Posts: 2

Joined: March 06, 2006

Location: United States

Posted: March 06, 2006 at 11:32 PM / IP Logged

so do i just dis-connect the factory alarm brain and use the existing wires??

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

python 3000esp in 92 lexus sc300

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.