561t on a 2002-2003 Nissan Maxima

Home / the12volt's Install Bay / Car Security and Convenience / 561t on a 2002-2003 Nissan Maxima (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

deckdout2

Member - Posts: 12

Joined: September 19, 2003

Posted: March 13, 2006 at 7:53 PM / IP Logged

Has anyone successfully installed this on a 6-speed maxima using the 556u bypass? I need more details please. I have everything connected, but the system is not starting. If anyone has any insight on this, please let me know.

Thanks

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: March 13, 2006 at 8:06 PM / IP Logged

Need to bypass the clutch switch. That and you need an r/s designed for a manual.

Cause I'm So white and nerdy...

First Class Certi-fried installer

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: March 13, 2006 at 8:07 PM / IP Logged

That system is not for use in a M/T vehicle.

What do you mean by not starting..is it cranking and not starting, is it not cranking at all, is it starting then dying right away. Need more detail.

deckdout2

Member - Posts: 12

Joined: September 19, 2003

Posted: March 13, 2006 at 8:27 PM / IP Logged

This add-on rs actually does work on a Maxima this model. On maxima.org there are a few that have done this, but most have taken it to shops in their area and do not have details.

I've bypassed the clutch with the Neutral safety switch wire connected to the ecu. It sends a negative pulse to the alarm when in neutral, and a positive signal when in gear. This is how everyone has done it on these cars. That part I've gotten.

What I mean by not starting, is that it's not even going through the initial rs cycle. Like the system is not recognizing a rs module there. So it's not basically booting up to prepare it to even start to crank.

I'm kind of at a loss, cause I'm not sure where to start troubleshooting. I've rechecked all the connections numerous times with a voltage meter as well.

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: March 13, 2006 at 9:18 PM / IP Logged

What did you hook the activation input on the 561t to?

Its good to see you have tied into the Neutral wire.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

561t on a 2002-2003 Nissan Maxima

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.