2003 Yukon XL, autopage 520

Home / the12volt's Install Bay / Car Security and Convenience / 2003 Yukon XL, autopage 520 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

904sorock

Member - Posts: 5

Joined: April 18, 2006

Location: United States

Posted: April 18, 2006 at 2:29 AM / IP Logged

Does anybody have the directwire diagram for a 2003 yukon xl , i am installing a autopage 520 and cannot locate the door lock , dome light , etc wires. any tips on this install thanks salmen@sbcglobal.net

also where can i buy the directire software or can i pay somebody for access to dei database. thanks

Salmen

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: April 18, 2006 at 7:04 AM / IP Logged

DesignTech is now owned by DEI. You can find the info for your truck here. This site is free, and is the same information as you would get at Directechs, minus accessory information and the bypass info is listed seperately.

You can also purchase this. I have not used it, but have heard nothing but good things about it. And the price is awesome.

Hope this helps.

Keep us posted.

904sorock

Member - Posts: 5

Joined: April 18, 2006

Location: United States

Posted: April 24, 2006 at 5:20 PM / IP Logged

My 2003 yukon xl does not have the door lock switch on the rear right panel. looks like i will need the door lock module. are there any other ways to do it , where does the door lock module get tapped into . thanks

Salmen

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: April 24, 2006 at 6:58 PM / IP Logged

The module to control door locks and alarm functions on the 2003 and newer GM trucks taps onto the violet Class II data bus wire at the diagnostic connector under the left side of the driver's dash.

sparky

904sorock

Member - Posts: 5

Joined: April 18, 2006

Location: United States

Posted: April 24, 2006 at 7:19 PM / IP Logged

do they sell them for the door lock only . the ones ive seen are passlock and door lock combo together , since i am not doing remote start i will not need passlock bypass. where can i buy the interface. thanks for your help.

Salmen

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: April 26, 2006 at 8:15 AM / IP Logged

You can get door modules only from Bypasskit.com or from virtually any shop that deals with alarms & remote starters as well.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 Yukon XL, autopage 520

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.