DEI Responder remote 479v/p/c

Home / the12volt's Install Bay / Car Security and Convenience / DEI Responder remote 479v/p/c (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cobbler

Member - Posts: 8

Joined: December 12, 2005

Location: Canada

Posted: April 26, 2006 at 7:58 PM / IP Logged

I have a Clifford Matrix RS3 installed in my '03 Toyota Matrix XRS and my Responder remote stopped working. It receives the signal when the car is armed by another remote, but it cannot transmit. I have since bought 2 Python 479 remotes on Ebay, and one works fine while the other one can transmit but not receive. I opened both of the remotes and swapped the antenna board portion and it works fine. Can anyone tell me where i can get a replacement board, or have a schematic of it? I still have the old board that I can pull parts off of. BTW Python and Viper boards are slightly different.

I've read the posts and I think a lot of people are having this same problem, I think mine went bad when I got a static shock from my car. Tried to upload pics of the internals but file was too large.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: April 26, 2006 at 10:24 PM / IP Logged

viper have two diff versions of remote. 1st one do not have single button programming (locate on the back), 2nd version do have it along w/ rsx3.5(might be wrong w/ this one) and python 881xp.

ofcourse the second version is a lot better, the soldering method do not carry on like the viper 790xv or clifford rs3

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

cobbler

Member - Posts: 8

Joined: December 12, 2005

Location: Canada

Posted: April 26, 2006 at 10:46 PM / IP Logged

Funny you mention soldering, because I decided to touch up all the solder on the Viper remote board, and it worked! I Know for a fact the Clifford RS3's remote had a lot of cold solders in the connecting pin areas. If only I can fix the Python's. Some may think it's a waste of time to repair, but considering these remotes are over CAD$100 at Future Shop.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI Responder remote 479v/p/c

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.