Removing an old Viper alarm

Home / the12volt's Install Bay / Car Security and Convenience / Removing an old Viper alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

scott1234515

Member - Posts: 7

Joined: April 29, 2006

Location: United States

Posted: May 15, 2006 at 7:46 PM / IP Logged

My alarm brian died (viper 800hf with valet remote start) and the installer wants $100 to remove the old wiring. I would like to do it myself. Is it a matter of removing the connections and matching up the correct wire colors and types?

It seems fairly simple to match up and reconnect.

Any advice? Car is a 2002 Kia Rio...

Thanks,

Scott

Scott C

Back to Top

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: May 15, 2006 at 8:56 PM / IP Logged

what happen to the unit, did the viper die or dint the valet die.

Back to Top

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: May 15, 2006 at 9:12 PM / IP Logged

Like swamprat323 has already asked, what happened to the unit? Did the installer that you asked to remove the system originally install it? It should still be in warranty if the installer is an authorized dealer. Labor is normally covered by the installer(all the installers I know give a lifetime warranty on labor) and the parts covered by the manufacturer if the installer is an authorized dealer of the product installed.

Back to Top

dxdenis02

Copper - Posts: 72

Joined: February 27, 2006

Posted: May 16, 2006 at 11:59 AM / IP Logged

dont remove it worst case buy the same alarm or any dei unit they all mostly have the same harness and you should be plug and play

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Removing an old Viper alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.