missing remote on viper alarm

Home / the12volt's Install Bay / Car Security and Convenience / missing remote on viper alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

donvito08

Member - Posts: 43

Joined: December 10, 2005

Location: Kansas, United States

Posted: May 23, 2006 at 9:12 PM / IP Logged

ok so a buddy of mine traded me a viper 350 hv alarm for installing some stuff for him but he only has one remote the otehr one was "stolen" is there any way to reprogram the unit so that only my one remote will work it?

Back to Top

spookiestylez

Silver - Posts: 531

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2005

Location: Virginia, United States

Posted: May 23, 2006 at 9:59 PM / IP Logged

the one remote should work now, search for programming dei remotes, also all replacment remote will work too and have programming instructions on the package.If I remember correctly.Turn the ignition on then off, press and hold the vprogramming button,after the chirp press then lock button on the remote, then turn the IGN o and off again, siren should chirp. Ill check a extra install book tomorrow at work at post back if I gave the wrong answer.GL

sS

Back to Top

donvito08

Member - Posts: 43

Joined: December 10, 2005

Location: Kansas, United States

Posted: May 23, 2006 at 10:03 PM / IP Logged

the remote i have does work what im asking is there any way from keeping the lost remote from working my alarm i dont like the feeling that some random person could disarm my alarm

Back to Top

spookiestylez

Silver - Posts: 531

Joined: September 23, 2005

Location: Virginia, United States

Posted: May 23, 2006 at 10:44 PM / IP Logged

since the *other* remote is already programmed to that alarm, no...you kinda screwd on that deal unless someone else here knows something I dont.

sS

Back to Top

donvito08

Member - Posts: 43

Joined: December 10, 2005

Location: Kansas, United States

Posted: May 23, 2006 at 10:46 PM / IP Logged

would addding the 2 way antenna and 2 way remote to this make only the two way remote work on the alarm on this forum iv seen people saying this alarm is 2 way ready

Back to Top

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: May 23, 2006 at 11:11 PM / IP Logged

Actually you can delete the missing transmitter from the system. Here's what you do. Open the door turn the ignition on. Push the valet button 9 times. Then push and hold it. The siren will chirp and the led will flash 9 times. While still holding the valet button, push the lock button on the transmitter. The siren should chirp once. That will erase all the transmitters from the systems memory. Now to reprogram the transmitter back to the alarm. Turn the igniton back on and push the valet button once. Then push and hold it. The siren will chirp and the led will flash once. While still holding the valet button, push the lock button on each transmitter you want to program to the system. ONce you do that just shut the car up and test it out. Should work fine for you.

Cause I'm So white and nerdy...

First Class Certi-fried installer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

missing remote on viper alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.