530t in a honda

Home / the12volt's Install Bay / Car Security and Convenience / 530t in a honda (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bigfoot286

Copper - Posts: 53

Joined: April 22, 2006

Posted: May 24, 2006 at 8:28 AM / IP Logged

Has anyone put the 530t in a 98 honda accord at all? i was wondering if i had to go to each door or just the drivers door. also has any one done the sunroof in one? do i have to go to the motor in the roof or juist to the switch in the dash? by the way i want to do all four windows and i do have 2 of the 530t. and if makes a diff i am using a viper 791

misterjimbo

Silver - Posts: 535

Joined: October 11, 2003

Location: Michigan, United States

Posted: May 24, 2006 at 11:48 AM / IP Logged

if the passenger window switch has express or one touch down you may need to go to the motor in the passenger door. if not you should be able to do them all in the drivers door. i have done a lot of hondas, but i dont specifically remember a 98 accord

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

530t in a honda

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.