Viper 550ESP on 1999 S-10... help!

Home / the12volt's Install Bay / Car Security and Convenience / Viper 550ESP on 1999 S-10... help! (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

adcapps

Member - Posts: 1

Joined: January 08, 2003

Posted: January 08, 2003 at 12:33 PM / IP Logged

Hey everyone. I am new to the site, but have been checking it out for several hours and love it so far. Anyhow, I have done several searches, and could not find the info i am in need of, so here goes. I have a 1999 Chevy S-10 (4 cyl. 2.2L, 5-speed) and am putting the Viper 550ESP (remote start, keyless, alarm) in it. However, I have ran into a problem. The remote start will start the engine, and then it immediately dies. I realize that this is because of the PASSlock system on the vehicle, but i cannot find a diagram or instructions on how to bypass it. This is in part due to the fact that i do not know which version of PASSlock is used in this vehicle. Any insight would be very helpful! Thanks for your time!

adam

Back to Top

10nesne1

Silver - Posts: 284

Joined: June 19, 2002

Location: British Columbia, Canada

Posted: January 08, 2003 at 1:13 PM / IP Logged

you will need to buy a 555L to bypass the Passlock system on this vehicle. Good luck

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 09, 2003 at 9:01 AM / IP Logged

I agree with 10nesne1 , purchasing a bypass module will be more beneficial to install for a beginner than trying to make your own bypass module. If the home made one ever fails you because of an installer error your stuck whereever you are until you reattach the wires . Most Passlock systems are cheap now , about $ 20 - 40 depending on where you buy them.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Viper 550ESP on 1999 S-10... help!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.