dome light supervision

Home / the12volt's Install Bay / Car Security and Convenience / dome light supervision (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

rock1

Copper - Posts: 120

Joined: April 06, 2005

Posted: May 29, 2006 at 9:55 PM / IP Logged

How do you connect the dome light supervision on a bulldog 62I there is no information in the manual. I was told it may need a relay do I have to cut any wires for this?

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: May 30, 2006 at 4:42 AM / IP Logged

On you 621 there is a violet wire that is your domelight supervision wire.To hook it up you need to wire it like this.

87-ground

86-violet wire from alarm

85-fused 12v

30-negative door trigger wire

make sure you install a 1 amp diode between 30 and the door trigger wire

"ole blake"

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dome light supervision

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.