97 Wrangler Alarm

Home / the12volt's Install Bay / Car Security and Convenience / 97 Wrangler Alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

drdave83

Member - Posts: 1

Joined: June 08, 2006

Posted: June 08, 2006 at 10:26 PM / IP Logged

Ok, so i've got a 97 wrangler with an aftermarket alarm. It says it's a "Pursuit" brand, however i can't find any existance of this company anymore. The alarm DRAINS my battery when the car sits for more than a week, so i want to take the alarm out (dissable it). From what i've been reading i just need to disconnect it's power and then remove the ignition kill relay and refuse the starter wire. Is there anything else I might have to do or do i have this figured out.

I just don't want to start this project and get stuck 1/2 way. Thanks so much!!

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: June 08, 2006 at 10:42 PM / IP Logged

audio vox makes them. fidn model number and got to audiovox website for a install guide

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 Wrangler Alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.