Viper 5000 on 2000 subaru

I have a 2000 impreza 2.5rs, and am going to be installing a viper 5000 this weekend, i need to know which wires from the viper to the car i need, the main question i have is im pretty sure the cars door locks are - polarity, on the main harness on the viper it has green ---- to (-) door switch wire Violet ----to (+) door switch wire those are to tell the alarm when the door is open right? also it has a door lock harness with these wires violet ---unlock #87 normally open (input) blue/black---unlock #30 common (output) BROWN / black unlock #87A normally closed Violet/black lock #87 normally open (input) GREEN/ black lock #30 common (output) WHITE/ black lock #87A normally closed BLACK/ white Domelight supervision relay input #87 i need to know which of those wires i need to wire in, i know i wont have to use all of them, i have a 2 door coupe... any info will be great Thanks Greg

Since the car have neg polarity Ground the violet wire (input to your lock and unlock wire) dont need brown, white, or black blue is unlock green is lock

can u specify a little more. dont need brown, white, or black??? from the viper harnes??

violet ---unlock #87 normally open (input) blue/black---unlock #30 common (output) BROWN / black unlock #87A normally closed Violet/black lock #87 normally open (input) GREEN/ black lock #30 common (output) WHITE/ black lock #87A normally closed BLACK/ white Domelight supervision relay input #87 Since the car have neg polarity Ground the violet wire (input to your lock and unlock wire) dont need brown, white, or black (CUT THESE WIRES) blue is unlock green is lock on main harness, those are door trigger wire green for neg purp for pos since ur car has neg, use the green wire and cut the purp