flip down on 00 sierra

if you pull out the back light if it has one you will see that you can attached small screws with a piece of wood above headliner to support the monitor. hope this helps. ps you should be able to slide wood through the side i dont cut the headliner unless 100% have to and i encourage the same for others. as far as others go there lazyJon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

i would suggest you drop part of the headliner so you can slide some wood ( i say to drop part of the head liner so you dont crease the headliner hard to fix and expensive to replace)i usually use 1/4 mdf not to heavy but it will hold the overhead in place. You should cut the wood about and inch or two bigger then the unit and you will be able to screw into that hope that helps"Computer games don't affect kids, I mean if Pac Man affected us as kids, we'd

all run around in a darkened room munching pills and listening to repetitive

music."-Kristian Wilson, Nintendo Inc.