791xv no remote start

Home / the12volt's Install Bay / Car Security and Convenience / 791xv no remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ty

Copper - Posts: 137

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 16, 2004

Location: United States

Posted: August 08, 2006 at 6:23 PM / IP Logged

anyone hooked up this alarm with no remote start? I have a 5speed and don't really feel like starting into a wall by accident.

I just need to know about the 7pin remote start ribbon harness, I only need to keep the (+) Yellow ignition input to alarm, and don't need the other ignition, starter, accesory relay turn on's right??

I do have the thicker wires hooked up for constant, purple and green for starter kill, and pink for ignition, just curious about the other side of the relay. I am relocating alarm brain and don't really want to lengthen wires I don't need to.

Back to Top

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: August 08, 2006 at 6:26 PM / IP Logged

no all you need is the yellow ane the ground whjen arm for starter kill. not sure what color it is in the ribbon harness may be orange

Back to Top

ty

Copper - Posts: 137

Joined: September 16, 2004

Location: United States

Posted: August 08, 2006 at 6:41 PM / IP Logged

ok so the yellow and ORANGE / black on remote start ribbon harness seen here right?..

http://www.directechs.com/guides/manuals/ig/viper/N564V_07-05.pdf

Or do you mean the orange ground when armed on the H1 primary harness?

Back to Top

swamprat323

Gold - Posts: 1,335

Joined: September 22, 2002

Location: Florida, United States

Posted: August 08, 2006 at 7:10 PM / IP Logged

ORANGE / black that for the starter kill

Back to Top

kaezoo

Copper - Posts: 125

Joined: April 26, 2005

Location: United States

Posted: August 08, 2006 at 7:39 PM / IP Logged

If you have the pink wire from the relay pack hooked up to ignition, then the alarm will get the correct ignition input through the ribbon cable. As long as you don't ground the BLACK/ white NSS wire, the remote start will never activate; don't worry about trying to disconnect the other ribbon cable wires.

Back to Top

ty

Copper - Posts: 137

Joined: September 16, 2004

Location: United States

Posted: August 09, 2006 at 1:55 AM / IP Logged

^^^well as I said the car will not ever have remote start, and it will be less wires I have to solder when relocating the brain, and I de-pin all of my harnesses so if I ever need to run remote start on another car will be no problemo.

Thanks to all who answered question.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

791xv no remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.