the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Weak door locks


Post ReplyPost New Topic
< Prev Topic Next Topic >
mik3 
Member - Posts: 4
Member spacespace
Joined: August 24, 2006
Posted: August 24, 2006 at 5:55 PM / IP Logged  
I have a 99 Honda Prelude and it's been broken in before. The thief must have messed up the power door locks somehow because they do not work anymore. It is getting aggervating not being able to use the keyless entry. It works occasionally but if I try right after that, all it does is click and TRIES to lock/unlock but doesn't. What can i check?
swamprat323 
Gold - Posts: 1,335
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: August 24, 2006 at 7:54 PM / IP Logged  
you lock just may be goign dead, pull door pannel off see if the lock is lose or mayeb lose conection.
mik3 
Member - Posts: 4
Member spacespace
Joined: August 24, 2006
Posted: August 24, 2006 at 10:22 PM / IP Logged  
It's as though something's not getting enough power or so. It works when it wants too.
swamprat323 
Gold - Posts: 1,335
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: August 24, 2006 at 10:36 PM / IP Logged  
are they factory locks and aldo factory keyless. still pull panel off maybe soemthign loose
mik3 
Member - Posts: 4
Member spacespace
Joined: August 24, 2006
Posted: August 25, 2006 at 8:12 PM / IP Logged  
It's all factory. Everything is in tack, i just wanted to know where to check to see if something's not getting the right amount of power.
swamprat323 
Gold - Posts: 1,335
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: August 25, 2006 at 9:01 PM / IP Logged  
does it work all the tiem by the switches in side the car. if locks work great form switches then need to look more into the factory keyless system. if lokcs dotn work to well form switches then its the locks itself
mik3 
Member - Posts: 4
Member spacespace
Joined: August 24, 2006
Posted: August 26, 2006 at 9:00 PM / IP Logged  
I get the same result when using the switch on the inside so it's not the keyless itself. Is there some box or something that controls the locks because BOTH locks don't work whenever it malfunctions.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 21, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer