disable viper 791 without remote

My car keys got stolen so I can't disable the alarm. I tried to valet switch method of putting the key into the ignition, turning it to on, and pressing the button within 15 seconds and it won't disable. Well I found out my switch was broken so just stripped the wires back and touched them manually. This however, doesn't work and my car alarm still won't turn off. Any ideas?

You can try something such as find the brain and disconnect two harness out of it. One being the ribbon cable (7 wires)and the other being the harness with 12 wires. They are next to each other. This should allow you to start the vehicle and disarm the alarm.I may be lost but I am making good time.

turn ignition on press the valet/programm button once (default) it should turn off after like 5 secs Note: You Always Dont Get What You Pay For.

Take it to the nearest Directed dealer and they will assist you unless the car is stolen then they may not. I have a hard time giving this type of info out to a person that has no location listed and only registered to ask this one question. You should have the info you need in the owner's manual that was provided to you when you had the system installed.Steve G