05 Odyssey Sliding Door?

Is there any way to do these with having any special part for it. On directechs it says to use a 611T. I have no problem ordering it, just wondering if anyone has done sliding doors with an aftermarket alarm without it.

you cando it with 4 relays.. you will probably need 3 aux (-) triggers one opens driver one opend pass and one to close both. Relay (A) 86 (-) output of alarm 87 to white and blue 85 to 12v 30 to 30 on relay (B) - Relay (B) 86 to (-) output from alarm (doors close) 87 to white and black 85 12v pin 30 too relay (A ) AND lt green / white Relay (C) 86 to 86 on relay (B) 87 too pink 85 12v 30 to 30 on relay (D) Relay (D) (- ) aux output (open pass door) 87 to red and white 85 12v 30 too light green AND pin 30 relay (C) All the wires your tapping into are in the slideing door switch connector (green connector) Sorry if that is confuseing but I cant gett the diagram off the database... Good luck!Tire Proz Stillwater Mn

High End Restyling and Comlete Repair

Also, have a look at the CAN SL. May be worth the $. Be careful whose advice you buy, but be patient with those who supply it.