the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

05 Jeep Liberty tach


Post ReplyPost New Topic
< Prev Topic Next Topic >
xtremej 
Gold - Posts: 1,440
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 24, 2006
Location: United States
Posted: October 18, 2006 at 1:10 PM / IP Logged  

Yes you can grab it at the injector but I am wondering if anyone knows of an alternate source, I am not a fan of using the injector wire. I thought there was a wire at the pcm but my memory is fading..

kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: October 18, 2006 at 2:42 PM / IP Logged  
cant you just grab it at the coil?
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
xtremej 
Gold - Posts: 1,440
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 24, 2006
Location: United States
Posted: October 18, 2006 at 3:20 PM / IP Logged  
ok coil per cylinder use the wire that is not the common color (red)? I'll giver shot..
Chris Luongo 
Platinum - Posts: 3,746
Platinum spaceThis member consistently provides reliable informationspace
Joined: May 21, 2002
Location: Massachusetts, United States
Posted: October 18, 2006 at 3:48 PM / IP Logged  
PCM on driver's side fender. Three plugs side-by-side.
On the '04-older Liberties, I've used gray/black, in the rear-most plug.
Haven't tried it since the '05-up changes....I don't know if it'll still be the same.
xtremej 
Gold - Posts: 1,440
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: February 24, 2006
Location: United States
Posted: October 18, 2006 at 4:32 PM / IP Logged  

05 is different I went for the gray black and it was awol. I grabbed it at the coil but I am still getting the starter staying on about 1/2 a second to long tried learning the tach at a lower rpm to no luck. I called tech they were very helpful, not:(...


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 12, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer