2005 grand cherokee remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2005 grand cherokee remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tireman

Member - Posts: 3

Joined: December 05, 2006

Location: United States

Posted: December 05, 2006 at 8:33 AM / IP Logged

I just installed a Bulldog RS in an 05 Grand Cherokee. I hooked up the Accessory and 2nd starter like this: http://64.85.6.129/extrainfo/diagrams/26500_GRAND-CHEROKEE_CHRYSLERS%20STARTER%202%20AND%20ACCESSORY%20DIAGRAM.pdf">Relay diagram

Now when I shut the vehicle off It diesels until the fuel stops. There is not a crisp ignition stut down. This happens whether I use the sterter or the key to start it. I tried to disconnect the white wire on the 86 terminal on the acc relay and the problem goes away... except now I have no acc while running.

Any ideas??

Keep in mind I am a Newbie!

Back to Top

Hymer

Silver - Posts: 695

Joined: November 20, 2004

Location: United States

Posted: December 05, 2006 at 8:50 AM / IP Logged

you could try a 610 ohm instead of a 560 ohm.. It may need to seek 1k to ground at shutoff.. Call The resistances are probably out of tolerance.. recheck them

Tire Proz Stillwater Mn

High End Restyling and Comlete Repair

Back to Top

tireman

Member - Posts: 3

Joined: December 05, 2006

Location: United States

Posted: December 09, 2006 at 8:38 AM / IP Logged

Is it possible that I have the diode on the starter 2 relay going the wrong way?

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 09, 2006 at 12:30 PM / IP Logged

It is poss. remember, a diode can "stop" both 12volts, AND ground....

Back to Top

tireman

Member - Posts: 3

Joined: December 05, 2006

Location: United States

Posted: January 05, 2007 at 4:53 PM / IP Logged

Just in case others may run into this -... I had to diode isolate the white wire on the acc realy. Problem solved works perfect. Thanks for the help.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 grand cherokee remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.