2001 sentra Se with PP Alarm Wiring?

Home / the12volt's Install Bay / Car Security and Convenience / 2001 sentra Se with PP Alarm Wiring? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

starnight

Member - Posts: 3

Joined: December 10, 2006

Location: Canada

Posted: December 10, 2006 at 12:14 AM / IP Logged

I wanted to know if anyone can give me the wireing diagram fo the sentra 2001 se

thanks in advance...

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 10, 2006 at 8:16 AM / IP Logged

12volts	WHITE/ red	+	ignition harness
Starter	BLACK/ white	+	ignition harness
Second Starter	BLACK / YELLOW	+	ignition harness
Ignition	BLACK/ red	+	ignition harness
Second Ignition
Third Ignition
Accessory	white	+	ignition harness
Second Accessory	WHITE/ blue	+	ignition harness
Keysense	blue/white	+	Time Control Unit or SECU
Notes: The Time Control Unit or the SECU (smart entrance control unit) is to the right of the steering column.
Power Lock	gray	-	Time Control Unit or SECU
Notes: The Time Control Unit or the SECU (smart entrance control unit) is to the right of the steering column.
Power Unlock	PURPLE / red	-	Time Control Unit or SECU
Notes: The Time Control Unit or the SECU (smart entrance control unit) is to the right of the steering column.
Lock Motor	RED / black		pin 15 at SECU
Notes: The Time Control Unit or the SECU (smart entrance control unit) is to the right of the steering column.
Unlock Motor	blue/red		pin 13 at SECU
Notes: The Time Control Unit or the SECU (smart entrance control unit) is to the right of the steering column.
Parking Lights+	wht/red or RED / blu		headlight switch or DKP
Parking Lights-
Hazards	ORANGE / black	-	pin 7 at SECU
Notes: The Time Control Unit or the SECU (smart entrance control unit) is to the right of the steering column.
Turn Signal(L)
Turn Signal(R)
Reverse Light
Door Trigger		-
Notes: On vehicles without power doorlocks use RED / white in the drivers kick panel. Vehicles with power doorlocks use red for the drivers door and RED / white for the passenger doors, at the Time Control Unit or SECU.
Dome Supervision	use door trigger
Trunk/Hatch Pin	RED / black	-	trunk light or SECU
Notes: On models without the SECU, have to diode isolate the trunk pin wire from the trunk light to avoid falsing problems. The Time Control Unit or the SECU (smart entrance control unit) is to the right of the steering column.
Hood Pin	pink/black	-	hood switch or SECU
Notes: The Time Control Unit or the SECU (smart entrance control unit) is to the right of the steering column.
Trunk/Hatch Release	red	-	release switch
Notes: Can also use pink/black in pin 12 at the SECU but it is high current negative, and must use a relay.
Power Sliding Door
Factory Alarm Arm	lt. GREEN/ red	-	pin 41 at SECU
Notes: The Time Control Unit or the SECU (smart entrance control unit) is to the right of the steering column.
Factory Alarm Disarm	WHITE/ blue	-	pin 30 at SECU
Notes: The Time Control Unit or the SECU (smart entrance control unit) is to the right of the steering column.
Disarm No Unlock
Tachometer
Notes: For tach go to any of the coils and use one of the following: BLACK/ red, purple, blue/red, or gray/red. Can also use blue/orange at the instrument cluster if vehicle is equipped with a tachometer.
Wait to start
Brake Wire	RED / green	+	brake pedal switch
Parking Brake
Horn Trigger	WHITE/ green	-	steering column or SECU
Notes: The Time Control Unit or the SECU (smart entrance control unit) is to the right of the steering column.
Memory Seat 1
Memory Seat 2
Memory Seat 3

Interface Module:	Category: Immobilizer Bypass	Required: Yes	Type: Transponder
Part #: 1100F
Alternate Part1 #: 1100X
Alternate Part2 #: OM-Nissan-1
Alternate Part3 #: 556UW

Mike M2

Tech Manager

CS Dealer Services

Back to Top

starnight

Member - Posts: 3

Joined: December 10, 2006

Location: Canada

Posted: December 10, 2006 at 11:06 AM / IP Logged

thanks but if i don't have remote starter just alarm

i don't need bypass module for the factory alarm ????

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 10, 2006 at 11:50 AM / IP Logged

Nope, just be sure to hook up factory alarm disarm...

Mike M2

Tech Manager

CS Dealer Services

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 sentra Se with PP Alarm Wiring?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.