viper 160XV, 2005 suzuki forenza

Home / the12volt's Install Bay / Car Security and Convenience / viper 160XV, 2005 suzuki forenza (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jeffdady

Member - Posts: 4

Joined: December 11, 2006

Location: United States

Posted: December 12, 2006 at 12:34 PM / IP Logged

Hello,

I have just tried to install a viper 160xv into a 2005 suzuki forenza. I have everything hooked up and when i hit the start button nothing happens. All wires seem to be hooked up correctly.

Back to Top

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: December 12, 2006 at 12:44 PM / IP Logged

The vehicle doesn't have a factory immobilizer, basically just go over and recheck that all the connections are done properly

Back to Top

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: December 12, 2006 at 12:45 PM / IP Logged

have you programmed the tach yet???

Back to Top

jeffdady

Member - Posts: 4

Joined: December 11, 2006

Location: United States

Posted: December 12, 2006 at 3:32 PM / IP Logged

I dont think i got the right tech, I dont know where to find it. Any Help?

Back to Top

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: December 12, 2006 at 4:32 PM / IP Logged

the wire is grey and it is behind the instrument cluster, and it is also at the ECM

the ecm is in the engine compartment attached to the middle area of the firewall and is also grey

Back to Top

jeffdady

Member - Posts: 4

Joined: December 11, 2006

Location: United States

Posted: December 12, 2006 at 8:56 PM / IP Logged

I got it working!!! Thanks for the help! I didn't know that the wires are numbered going to the ecm. There were three greys and i now have the correct one, thanks again

Back to Top

jeffdady

Member - Posts: 4

Joined: December 11, 2006

Location: United States

Posted: December 19, 2006 at 12:40 AM / IP Logged

I have a question on the locks now. There is a feature on the door where if you lock it when the drivers door is opened, it will unlock so you have to use the key to lock the door. Is there a wire i need to ground so the doors will stay locked if the door is open and i use the remote locks?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 160XV, 2005 suzuki forenza

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.