2005 Eclipse Factory Alarm

Home / the12volt's Install Bay / Car Security and Convenience / 2005 Eclipse Factory Alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

aho355

Member - Posts: 11

Joined: February 26, 2005

Location: Ohio, United States

Posted: December 20, 2006 at 8:02 PM / IP Logged

I have just completed a remote start / keyless / alarm system in a 2005 Eclipse. Everything seems to be working great except for the fact that when the doors are locked from the interior door switch or with the key on the outside of the door when you return and unlock the door with the new alarm remote, open the door the factory alarm starts going off. I need help figuring out how to disable the factory alarm system.

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: December 20, 2006 at 8:19 PM / IP Logged

DEI lists:

Factory Alarm Disarm orange - ETACS ECU, pin 25

With this note: MITSUBISHI, ECLIPSE, 2005, Factory Alarm Disarm

Meter this wire while turning the key in the driver door key cylinder.

The ETACS ECU is attached to the back of the fuse box.

Hope this helps.

aho355

Member - Posts: 11

Joined: February 26, 2005

Location: Ohio, United States

Posted: December 20, 2006 at 10:07 PM / IP Logged

I'll give that a try. Thanks for the help.

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 20, 2006 at 10:10 PM / IP Logged

Why would you e locking the door from the inside with the switch.....AND, why would you be putting the key in the door to lock???

Use the transmitter to do the work for ya.

FACTORY ARM	Lt.GREEN/ black	On white junction block in driver's kick	-
FACTORY DISARM	Orange	On white junction block in driver's kick	-

aho355

Member - Posts: 11

Joined: February 26, 2005

Location: Ohio, United States

Posted: December 22, 2006 at 8:19 AM / IP Logged

That is a good question and I asked the same thing. This was installed in a friends vehicle and she decided to lock the doors by using the inside door switch shortly after the install and the alarm started sounding off. Just trying to help her from having to worry about that happening again. Thanks again for the help.

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: December 22, 2006 at 8:25 AM / IP Logged

aho355 wrote:

Simply tell her NOT to use thefactory transmitters, or locking of the doors manually. Use the NEW transmitter only.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2005 Eclipse Factory Alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.