07 Jeep Sahara remote start

Home / the12volt's Install Bay / Car Security and Convenience / 07 Jeep Sahara remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ultimateauto

Member - Posts: 1

Joined: November 28, 2006

Location: United States

Posted: January 01, 2007 at 6:56 PM / IP Logged

Looking to install a remote start on a 07 Sahara, but can't find any info on wiring... Also wondering if the Sahara requires any type of bypass mod, such as a sentry key or transponder. any info would greatly be appreciated.

Ultimate Auto Sport...

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 02, 2007 at 3:17 PM / IP Logged

Wiring will be alot like the Liberty and TJ's. Traditional Dodge/Jeep wiring and the door locks will most likely be resistor based along with the OEM security. If the OEM keyless is built into the head of the key, chances are it's Sentry based and you can use any of the 05/06 Sentry bypasses for this vehicle.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

ultimate auto

Member - Posts: 1

Joined: September 20, 2006

Posted: January 06, 2007 at 9:21 PM / IP Logged

I was under the impression that the wiring would be the same as a wrangler and even if it is the same as a liberty or tj the only info i can find is on an 05 liberty... nothing for 07.... As for the key, I just found out it's black with a seperate keyless remote. I'm assuming for now that there is no bypass needed, as for the door locks how can i test for resistance, where can i find the door lock wire ( Location )?

u.a.s.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

07 Jeep Sahara remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.