Viper alarm ?

Okay not sure what model Viper alarm it is because it was in the car when I bought it but I do know it's Viper. Well I recently had some stereo work done and I noticed that the windows don't auto roll up when I activate the alarm like they used to. Well yesterday I leave my windows cracked go into the supermarket activate alarm return,deactivate and before I can put in my ignition key the alarm starts blaring I hit the remote keys,nothing car cranks and I drive for maybe 2 miles,,alarm stops but upon stopping and exiting the car it briefly sounds and I now have 1 single red light always on in my dash(which I've never seen before?) and it does'nt "chirp" & flash lights when I activate it now just that one lone red light is on whether activated or not.

Sounds like your in valet mode. The LED is constant. right?

KarTuneMan wrote: Sounds like your in valet mode. The LED is constant. right?

Correct 1 single red one center of dash.

How do I get out of valet mode ?

Be sure ANY door is OPEN then do the lock, unlock, lock procedure on the remote.

2 ways. 1. open door hit lock then unlock then lock again. if have the remote were lock and unlock are same buttons then use first button then 2nd then first again............make sure door is open. 2. turn ign on tehn turn ign off then pres the vaelt button all of this needs to be doen in 10 sec or less