gmdl-bp

Home / the12volt's Install Bay / Car Security and Convenience / gmdl-bp (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

darklegacy540

Member - Posts: 13

Joined: December 26, 2005

Posted: January 10, 2007 at 3:41 AM / IP Logged

This is the first time I'm installing the GMDL-BP from bypasskit.com so I have a couple questions..

I'm looking at the installation sheet and it says, "Door Trigger Output."

1. Am I supposed to be wiring the actual door trigger wire from the vehicle.. or the door trigger wire from the remote start? And if it is from the remote start, what if the remote start I'm installing, does not have a door trigger wire?

2. In regards to the Dome Light Input. The vehicle this is going into, has a dome light delay. According to Techsoft, I should be using all five wires and diode isolate each. Do I need to put in that extra work or is it okay to use the dome light wire?

Thanks in advance.

Back to Top

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: January 10, 2007 at 6:32 AM / IP Logged

If you are only installing a remote start there is no connection to these wires.

Back to Top

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: January 10, 2007 at 7:26 AM / IP Logged

It would help if you'd let us in on what you're installing, and into what kind of car.

Back to Top

darklegacy540

Member - Posts: 13

Joined: December 26, 2005

Posted: January 12, 2007 at 1:45 AM / IP Logged

2005 Chevrolet Trailblazer..

ONLY remote start and keyless.

Back to Top

xtremej

Gold - Posts: 1,440

Joined: February 24, 2006

Location: United States

Posted: January 12, 2007 at 7:52 AM / IP Logged

You don't need door trigger or domelight on that vehicle for what your doing, just RED / BLACK/ BROWN / GREEN/ blue and violet to the diagnostic plug in the vehicle. make sure to follow the programming steps.

Back to Top

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: January 12, 2007 at 8:32 AM / IP Logged

That's right. No need for the pink, pink/white, or PURPLE / white.

Back to Top

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: January 12, 2007 at 8:33 AM / IP Logged

That's right. No need for the pink, pink/white, or PURPLE / white.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

gmdl-bp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.