broken remote

Home / the12volt's Install Bay / Car Security and Convenience / broken remote (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

higguns

Member - Posts: 2

Joined: January 27, 2007

Location: Canada

Posted: January 27, 2007 at 1:20 PM / IP Logged

ok i have the alarm RST-774R installed on my 1990 crx si and i installed it myself. stupid me i never set up the pin code with the valet switch. also i never programed the backup remote cuz i figured i would never want to use it. anyways heres my delima: the 2 way remote doesnt work anymore i (with a fresh battery and all). so i want to program my backup remote to work but the alarm is armed. i thought if i disconnected the battery that i would reset the alarm but its doesnt work. anyone know how i can disarm the alarm without a working remote? or how i can program the remote while the alarm is armed?

higguns

Member - Posts: 2

Joined: January 27, 2007

Location: Canada

Posted: January 27, 2007 at 2:43 PM / IP Logged

figured it out

please delete

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

broken remote

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.