2006 mazda rx 8, clifford 10.2x

Home / the12volt's Install Bay / Car Security and Convenience / 2006 mazda rx 8, clifford 10.2x (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: February 20, 2007 at 1:11 PM / IP Logged

quick question

I am installing the clifford 10.2x in this vehicle and I have a question

the door lock harness that comes with this kit has 7 wires a BLACK/ white, WHITE/ black, GREEN/ black, PURPLE / black, BROWN / black, blue/black and a purple, now this vehicle has a 1 wire system and needs a ground and a resistor to lock and ground to unlock

just wondering how to wire this up

thanks mike

Hymer

Silver - Posts: 695

Joined: November 20, 2004

Location: United States

Posted: February 20, 2007 at 1:22 PM / IP Logged

Not sure what the wire colors are or what they corespond to, but its a relay of some sort.. you will end up not useing the 2 wires that corespond with 87A of he relay, ground the wires of pin 30 of the relay and the other 2 will be lock and unlock from pin 87 of the relay, tie whattever one needs to go to ground drectly to the lock/unlock of thecar, then the other you will run your resistor through, and connectit to the cars lock unl;ock...

Tire Proz Stillwater Mn

High End Restyling and Comlete Repair

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 20, 2007 at 1:28 PM / IP Logged

Built in relays with maybe a drivers door priority trigger?

The wires (in the manual) should give descriptions. N.O.,N.C., and common. Right?

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: February 20, 2007 at 1:33 PM / IP Logged

yah they have descriptions

purple unlock 87 normally open (input), blue/black unlock 30 common (output), BROWN / black unlock 87A normally closed

violet/black lock 87 normally open (input), GREEN/ black lock 30 common (open), WHITE/ black lock 87A normally closed and then BLACK/ white is a domelight supervision wire relay input 87 which I don't need

Hymer

Silver - Posts: 695

Joined: November 20, 2004

Location: United States

Posted: February 20, 2007 at 1:48 PM / IP Logged

Ground blue and black / green and black, dont use brown black / white black, Purple to the one wire locking and voilet and black to the same wire.. just remember to put the resistor to the right wire off the alarm...

Tire Proz Stillwater Mn

High End Restyling and Comlete Repair

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: February 20, 2007 at 2:08 PM / IP Logged

the violet/black and the violet wire connect with a fuse and then comes out of the fuse as one wire which is violet/black, this I believe will go to ground

wouldn't I hook the blue/black up to the lock/unlock wire in the car and the GREEN/ black wire with a 1k ohm resistor also to that same wire

correct me if I am wrong

Hymer

Silver - Posts: 695

Joined: November 20, 2004

Location: United States

Posted: February 20, 2007 at 2:36 PM / IP Logged

Yep, if the wires have a fuse to them, then run those to the ground, and the othere two to the locl/unlock wire.. It really doesnt matter much scince it is a (-) setup but good genral practice would say put the fuse to the feed side of the circuit... Good Luck!

Tire Proz Stillwater Mn

High End Restyling and Comlete Repair

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: February 20, 2007 at 2:38 PM / IP Logged

thanks for the info

Hymer

Silver - Posts: 695

Joined: November 20, 2004

Location: United States

Posted: February 20, 2007 at 2:42 PM / IP Logged

Any time....

Tire Proz Stillwater Mn

High End Restyling and Comlete Repair

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: February 20, 2007 at 5:04 PM / IP Logged

Take purple and PURPLE / black to ground, place resister in GREEN/ black, then join to blue/black thence to multiplex (single lock-unlock) cable. Don't use WHITE/ black, brown black. What's a 10.2x? Haven't seen new stuff over hear yet; ha ve you got Wizard to USB yet?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 mazda rx 8, clifford 10.2x

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.