reverse polarity door locks

Home / the12volt's Install Bay / Car Security and Convenience / reverse polarity door locks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

armstrng90

Member - Posts: 5

Joined: January 23, 2007

Location: Australia

Posted: February 27, 2007 at 5:15 PM / IP Logged

has any 1 used reverse polarity relay set up on a late model nissan or am i receiving incorrect information--always thought nissans were single wire set up but i cud b wrong.

Back to Top

KPierson

Platinum - Posts: 3,527

This member consistently provides reliable information

Joined: April 14, 2005

Location: Ohio, United States

Posted: February 27, 2007 at 5:50 PM / IP Logged

You can use reverse polarity but you won't get factory arm/disarm. Depending on what you are doing, a 5 wire setup may be easier then a (-) pulse.

Typically, the (-) pulse is inside the door, while the door lock actuator wires are in the drivers kick.

I've 5 wired the door locks in my G35 for an auto lock module I built, but I only did it that way because I don't care about OEM arm/disarm.

Kevin Pierson

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

reverse polarity door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.