89 240sx , compustar cm3000 starter prob

hey there, as the topic states i have an 89 240sx and i'm trying to install a compustar CM3000. -> problem is that i can start the car with key, but when i try to start it with the remote, it tries to crank it and it just keeps turning but will not turn over, i'm kind of lost at what i should do thanks. this is how my wiring is wired up brain -> car yellow -> BLACK / YELLOW (starter side) yellow/black -> BLACK / YELLOW (keyside) green -> BLACK/ white white -> blue now i got a nice tach signal since the brain chirps once confirming so.

THis is what you should have done: CM3000 / CAR GREEN   / BLACK/ RED BLUE    / BLACK / YELLOW The starter wire is actual the BLACK/ WHITE in the ignition harness. YOu have the wrong starter wire and the wrong ignition wire. That's the problem.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

hey velocity i don't have a BLACK/ red i have BLACK/ green, BLACK / YELLOW, BLACK/ white, and WHITE/ red so would i use BLACK/ green opposed to BLACK/ red?

i don't believe there is a blue wire? unless the white was suppose to go the BLACK / YELLOW