not needing d.lock interface for ’03 chevy

Home / the12volt's Install Bay / Car Security and Convenience / not needing d.lock interface for ’03 chevy (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: March 05, 2007 at 12:45 PM / IP Logged

I remember reading a tech tip in the mobile electronics magazine about a way to grab the doorlocks without the use of a interface module. something about adding pins to a certain plug.... anyone remember this, or know about it?

Mike Battaglia

Specialized Car Audio

Bensenville IL 60106

Back to Top

master5

Silver - Posts: 1,123

Joined: October 10, 2006

Location: United States

Posted: March 05, 2007 at 12:53 PM / IP Logged

There is no mention of the make/model of the vehicle. Perhaps it didn't post completly.

Back to Top

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: March 05, 2007 at 12:57 PM / IP Logged

my bad, 03+ full size chevys

Mike Battaglia

Specialized Car Audio

Bensenville IL 60106

Back to Top

misterjimbo

Silver - Posts: 535

Joined: October 11, 2003

Location: Michigan, United States

Posted: March 05, 2007 at 1:02 PM / IP Logged

sometimes there is a light blue and a white at the bcm that will do the locks on the 03 through up until the new body style

Back to Top

master5

Silver - Posts: 1,123

Joined: October 10, 2006

Location: United States

Posted: March 05, 2007 at 1:22 PM / IP Logged

http://www.directechs.com/techtips/pdfs/resources/security/directed_techtips/1601.pdf

Correct...but if it is a model that does not do it at the BCM there is another way as well but seems alot quicker and easy to use the module. check the link.

Back to Top

whitey

Member - Posts: 49

Joined: October 03, 2003

Location: Canada

Posted: March 05, 2007 at 6:16 PM / IP Logged

on the bottom of the bcm there is a plug just above the brake pedal. Pins A2 and A3 are missing. Insert wires in these pins ant it will give you - lock and unlock. Dont quote me on the pin #s as it has been a while since I have done it this way but they are there.

Visions Edmonton

Installation Manager, DLS

MECP Certified First Class

Back to Top

mxxmikexx

Silver - Posts: 796

Joined: September 18, 2002

Location: United States

Posted: March 05, 2007 at 8:43 PM / IP Logged

that sounds more like it whitey. ill have to dig up my old issues of mobile electronics to double check the pin numbers

Mike Battaglia

Specialized Car Audio

Bensenville IL 60106

Back to Top

master5

Silver - Posts: 1,123

Joined: October 10, 2006

Location: United States

Posted: March 05, 2007 at 9:34 PM / IP Logged

That is a pretty neat time saver..as well as saving the $$ for a module. Post back the pin numbers if you figure it out so no one sends ground into the wrong spot and toasts a BCM.

Thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

not needing d.lock interface for ’03 chevy

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.