`56 f 100 power windows

Home / the12volt's Install Bay / Car Security and Convenience / `56 f 100 power windows (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gusso

Member - Posts: 3

Joined: March 01, 2007

Location: United States

Posted: March 08, 2007 at 12:16 AM / IP Logged

Need a little help. I`m putting power window harness and switches from a `90 mustang in my `56

f-100. I was under the impression you have to use a dei 530t and/or relays to make it work.

but the wiring diagram for `90 mustang shows direct wire hook up between switches, motors, etc.

Which is correct? Will they work without relays, etc.? Thanks gusso

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: March 08, 2007 at 7:01 AM / IP Logged

The switches handle the reversal circuit required for the windows in that particular application. If you want the windows to roll up and down via a remote control you would need the 530T.

Installer, IT support, and FFL. I need less hobbies.

gusso

Member - Posts: 3

Joined: March 01, 2007

Location: United States

Posted: March 08, 2007 at 12:18 PM / IP Logged

Twelvoltz, Thanks. Would the 530t have the instructions for hookup in this system for remote control?

And is there a certain remote control to use with the 530t or do you have to install an alarm with

acc hookup? Thanks again. Gusso

if it ain`t broke, fix it anyway

Twelvoltz

Platinum - Posts: 2,384

Joined: March 24, 2005

Location: New Jersey, United States

Posted: March 08, 2007 at 12:47 PM / IP Logged

The 530T's installation manual shows that it requires one auxiliary channel to control windows down and that is uses the armed output to control windows up. Take a look at the manual, it should answer your questions. If you hook up the 530T without an external control it will still give you the one-touch feature.

Installer, IT support, and FFL. I need less hobbies.

gusso

Member - Posts: 3

Joined: March 01, 2007

Location: United States

Posted: March 08, 2007 at 1:12 PM / IP Logged

Thanks Twelvoltz; Most helpful. Its great to have this expertise [yours] readily available

to us neophites, online. Thanks again. Gusso

if it ain`t broke, fix it anyway

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

`56 f 100 power windows

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.