99 lincoln navigator xr 7025

Home / the12volt's Install Bay / Car Security and Convenience / 99 lincoln navigator xr 7025 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Rqaasim

Member - Posts: 5

Joined: December 15, 2003

Location: United States

Posted: March 18, 2007 at 10:58 PM / IP Logged

Got the system up and working so not as bad as ive heard on reviews one small issue now with the remote start cant start with the key only works with the remote start i used the ignition output and reversed the polarity to trigger th 555F assuming when key is isserted and turned to start it reads the key and 555F signal looking for suggestions before i run a override toggle switch to the 555F input wire thank you in advance

Don't think you know it all someone always knows more

Back to Top

topper

Copper - Posts: 56

Joined: June 29, 2005

Posted: March 24, 2007 at 9:30 PM / IP Logged

if it is not starting with the key then your 555f is always on . 555f red wire to constant 12V+ blue wire to status output of alarm or 3rd ignition(-) output of alarm. lots of bad reviews on this alarm

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

99 lincoln navigator xr 7025

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.