compustar cm3000

Home / the12volt's Install Bay / Car Security and Convenience / compustar cm3000 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

wloandccp

Member - Posts: 3

Joined: March 31, 2007

Posted: April 04, 2007 at 7:28 PM / IP Logged

http://compustar.com/i have the compustar 2w900fmr and i want to install it on my car but i don't know where the wires go from the alarm to the car can anyone help me with this. at least help me out with the main wires to get power and do the remote start. the brain i have is the cm3000

peterubers

Silver - Posts: 706

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 29, 2006

Location: United States

Posted: April 04, 2007 at 7:37 PM / IP Logged

<....trying to read your mind.... darnit, still can't do it>

Why kind of car do you have? (make/model/year) .. that's a start

The best bet is for you to obtain an install manual for this model. Check the downloads section on this site.

The search function is your friend.

wloandccp

Member - Posts: 3

Joined: March 31, 2007

Posted: April 04, 2007 at 7:57 PM / IP Logged

i have a 1995 chevy cavalier

wloandccp

Member - Posts: 3

Joined: March 31, 2007

Posted: April 04, 2007 at 8:00 PM / IP Logged

I mean from the cm 3000 what wires connect to my car for the main power and the remote start

1995-96 Chevrolet Cavalier Security Information
Constant 12V+	Red	Ignition Switch Harness
Starter	Yellow	Ignition Switch Harness
Ignition	Pink	Ignition Switch Harness
Ignition 2	White	Must Use for Remote Start
Accessory	Orange	Ignition Switch Harness
Tach	White	Coil
Brake Switch	White	Brake Switch
Trunk Release	BLACK/ White (+)	OEM Keyless Module in Trunk
Trunk Pin	Black (+)	Light in Trunk
Parking Lights	Brown (+)	Driver's Kick Panel Main Harness
Head Lamp	Dark Blue (LO)	Pink (HI) at Head Light Switch
Hood Pin	n/a
Factory Disarm	n/a
Door Trigger	White (-)	Courtesy Light under Dash
Door Lock	Light Blue	Driver's Kick Panel Reverse Polarity
Door Unlock	White	Passenger's Switch is Master Switch
Horn Wire	Black (-)	Steering Column
Windows Up	LF=Dark Blue, RF=Light Blue, LR=Dark Green, RR=Light Green
Windows Down	LF=Brown, RF=Tan, LR=Purple, RR=Purple

evileagletalon

Copper - Posts: 65

Joined: November 17, 2006

Location: United States

Posted: April 04, 2007 at 9:52 PM / IP Logged

https://www.the12volt.com/installbay/file.asp?ID=355

https://www.the12volt.com/installbay/file.asp?ID=398

Search for other posts by evileagletalon

KarTuneMan

Platinum - Posts: 7,056

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: April 05, 2007 at 12:10 AM / IP Logged

LOOK at this closely my friend.......

Wire/Function

CM3000

Colour

Location/Description

Polarity

12 VOLTS

RED (CN1)

Red

Ignition harness

IGNITION

GREEN (CN1)

Pink

Ignition harness

IGNITION 2

GREEN (CN2) + Relay

White

Ignition harness

ACCESSORY

WHITE (CN1)

Orange

Ignition harness

STARTER

YELLOW (CN1)

Yellow

Ignition harness

KEY SENSE

Lt.green

Ignition harness

TACH SIGNAL

YELLOW/BLACK (CN3)

White

In engine harness

The engine harness is found at the front of the engine coming up over the transmission. Set your remote starter for 2 cylinders.

LOCK

BLUE/BLACK (CN4)

Lt.blue

In either kick panel

Rev Pol

Locks are mastered from the passenger side.

UNLOCK

BLUE (CN4)

White

In either kick panel

Rev Pol

Locks are mastered from the passenger side.

DOORPIN

RED / WHITE(-) or RED(+) (CN3)

White

At courtesy light under dash

TRUNK PIN

VIOLET/BLACK (CN3)

Black

At light in trunk

TRUNK RELEASE

VIOLET/WHITE (-) (CN4)

BLACK/ white or Black

At release switch in dash

BRAKESWITCH

LT.BLUE/WHITE (CN3)

White

At switch above brake pedal

PARKLIGHTS

GREEN / WHITE (+) (CN1) or (-) (CN2)

Brown

At light switch harness

HAND BRAKE

LT.BLUE (CN3) Manual only

Lt.blue

In connector above Driver's kickpanel

HORN

WHITE (-) (CN5)

Black

At steering column harness

CLUTCH SWITCH

Manuals only (see inst. Guide)

Purple

At switch above clutch pedal

TYPE 1

dswift

Copper - Posts: 396

Joined: March 12, 2007

Location: United States

Posted: April 05, 2007 at 3:52 PM / IP Logged

So your asking how to install? Good luck bro. just dont use no t taps and make sure you test the wires first. The guides are GUIDES. Sometimes they are a little off.

just wanted to put in my 2 pionts. shiiizer

"dont ground out!"

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

compustar cm3000

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.