remote start issue, 2001 acura mdx

First time posting and I need some help please.

I have a 2001 Acura MDX. I'm attempting to install a remote starter. I cannot get the immobilizer to work. Looking for which wires to hook up the immobilizer to. I'm using a Clarion/Ungo remote starter if it makes any difference. I have the 555U bypass module. Any help would be appreciated. I will check this often to post answers to question if I have not given information that may be required. Thanks!!

When you say that the immobilizer is not working, what do you mean?.  Is the car cranking and not turning over??  make sure you have the red to power, black to ground and blue to the status output from the ungo remote start.  I think ungo is DEI so it would be a blue/white wire or a blue wire.  Have the ring around the key cylinder and that should be it.  These things are as simple as bypassing can get. If you want to be more daring you can get a data immobilizer by either Fortin, DEI, or trilogix...

what he said. Get a HONDASL2i Non of that "U" ish again.

Did you know that an insurence company with not cover theft if they find a key in the dash? Thought you should know that fact.