code alarm ca680 remote shows open door

Home / the12volt's Install Bay / Car Security and Convenience / code alarm ca680 remote shows open door (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

fpmx117

Member - Posts: 3

Joined: July 09, 2007

Location: United States

Posted: July 09, 2007 at 10:31 PM / IP Logged

I have a 2007 Ford F350 that I just installed a Code Alarm CA680. When I hit the lock button on the remote it tells me that I have an open door and about every 10 seconds honks the horn. I notice that when I hit the lock button the dome lights do not go off which I am sure is part of the problem. If I let the dome light shut off before hitting the lock button it shows ARMED on remote but it still honks horn about every 15-20 seconds. Any help would be greatly appreciated. Brent

07 f350

Back to Top

KarTuneMan

Platinum - Posts: 7,056

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: December 14, 2004

Location: Isle Of Man

Posted: July 09, 2007 at 10:55 PM / IP Logged

Where did you pick up your door pins. Are they isolated (diodes) ? This truck has a domelight delay as well. See if there is a programing option on your alarm to disreguard the dome for arming.

Horn honking....is this the factory alarm doing this? or did you hook up the horn honk?

Back to Top

fpmx117

Member - Posts: 3

Joined: July 09, 2007

Location: United States

Posted: July 09, 2007 at 11:46 PM / IP Logged

I picked up the door pins in the driverside kick panel. I am not sure about isolated diodes? The alarm is hooked up to the horn. I do not think the remote has a option to disregard dome light.

07 f350

Back to Top

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: July 10, 2007 at 8:17 AM / IP Logged

I do not think the remote has a option to disregard dome light.

It won't be the remote that has this dome delay option, it's a programming issue on the install.

I picked up the door pins in the driverside kick panel. I am not sure about isolated diodes?

Is your alarm hooked to "all" of the pins (wires) If it is you WILL need to isolate them with diodes. UNLESS you are using a posative trigger. To isolate this one wire posative trigger you will need a relay.

code alarm ca680 remote shows open door -- posted image.

You say the hornis hooked to the alarm, is the siren also going off when the horn is?

Back to Top

fpmx117

Member - Posts: 3

Joined: July 09, 2007

Location: United States

Posted: July 10, 2007 at 12:23 PM / IP Logged

Thanks for the help. It ended up that I had not turned off the internal shock sensor and that was causing the horn to go off (I am running off external shock sensor). The truck does have a delay on the dome light. Remote flashes DOOR Open until light goes off and then armes fully. Problem solved!!

07 f350

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

code alarm ca680 remote shows open door

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.