clifford xl 100 on 2007 yukon

I just bought a 2007 yukon, and I want to have my clifford xl-100 installed on it (removed it from my 2000 explorer before trading).  My question is this: the yukon has factory remote start.

1. can the xl-100 be installed on this vehicle properly with the factory remote start usable?

2. will the remote starting of the vehicle trigger the shock alarm?

Thanks in advance,

Pharoahwen

Use a 1701g by DEI...when the your aftermarket system triggers the remote start which should not trigger the factory alarm and will also shunt certain triggers.  shunt=disable

No it does not use the factory key fob.

Lets just say its you install a viper 5900(a popular one) in your vehicle. This system is a alarm/remote start unit.  In your cause you would just connect the alarm portion and  you then would trigger a wire from the 1701g that would activate your factory remote start.  The range would be 1 mile and you would have a 2-way system.  Not only does the 1701g have a "remote start input" but it would also give you door triggers, locks etc.....  This should be a very very easy install and would keep the vehicle looking very clean under the dash.