2005 dodge caravan remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2005 dodge caravan remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

henrylfair

Member - Posts: 25

Joined: October 05, 2007

Location: New York, United States

Posted: October 20, 2007 at 1:48 PM / IP Logged

Do anybody know the easiest place to connect to the tach wire or oil sense wire cant get a good tach signal

Henry Fair

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: October 20, 2007 at 3:49 PM / IP Logged

Use a fuel injector, they will have a common colored wire at each use one of the odd colored wires at any injector.

Installer, IT support, and FFL. I need less hobbies.

henrylfair

Member - Posts: 25

Joined: October 05, 2007

Location: New York, United States

Posted: October 20, 2007 at 5:53 PM / IP Logged

hey direction on here say use pin 21 for parking lights - activation but installer software say to use WHITE/ orange wire and it is +activation anyone knows which is correct

Henry Fair

Twelvoltz

Platinum - Posts: 2,384

Joined: March 24, 2005

Location: New Jersey, United States

Posted: October 20, 2007 at 6:21 PM / IP Logged

For positive trigger parking lights DEI shows the WHITE/ orange as the right side only with a WHITE/ brown for the left side located in the driver's kick, harness to the rear.

They list the WHITE/ brown negative through a 2.1k resistor isolated from the switch.

Installer, IT support, and FFL. I need less hobbies.

henrylfair

Member - Posts: 25

Joined: October 05, 2007

Location: New York, United States

Posted: December 30, 2007 at 12:11 PM / IP Logged

Can any one give me suggestions on remote start that works well with the dodge Grand caravan in price range of $100- $200 i will be using the XK532 interface module

Happy New Years to All!!!!!!!

Henry Fair

henrylfair

Member - Posts: 25

Joined: October 05, 2007

Location: New York, United States

Posted: December 31, 2007 at 9:11 PM / IP Logged

Do any one know if you still need to use the door triger resistor when interfacing with XK532 or do the XK532 handle the door unlocking and locking witout the resistors

Henry Fair

tonyberg

Copper - Posts: 116

Joined: November 08, 2005

Location: North Dakota, United States

Posted: December 31, 2007 at 9:12 PM / IP Logged

it handles the lock unlock withOUT resistors

henrylfair

Member - Posts: 25

Joined: October 05, 2007

Location: New York, United States

Posted: December 31, 2007 at 9:24 PM / IP Logged

ok thanks were can i get the oil pressure or alternetor wire on 2005 dodge grand caravan also the best way to glab the parking lights wire

Henry Fair

tonyberg

Copper - Posts: 116

Joined: November 08, 2005

Location: North Dakota, United States

Posted: January 01, 2008 at 11:45 AM / IP Logged

i am unsure of the oil pressure or alternator wire...if you are just looking for a tach signal you can utilize the blue wire with a stripe at the back of the coil packs. Parking lights are WHITE/ orange in the driver kick panel , they are positive here

henrylfair

Member - Posts: 25

Joined: October 05, 2007

Location: New York, United States

Posted: January 12, 2008 at 11:21 AM / IP Logged

can any one help me out the xk532 say hook the data wire up to the white and orange wire on the skim but their only four wire and neither wire is white and orange

Henry Fair

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.