2005 honda crv, remote start

i am installing a remote starter on a 2005 crv. it all went well. it start up just fine. the only problemd i have is after shut down it goes in to valet mode everytime. does anyonw know why. i am using a prostart tw3400 . its a two way system.it doe not matter weather i shut it off using the transmitter or the by press the brakes it goes into valet mode. i can take if off from valter mode and restart untill the next shut down.

I am not familiar with that system, but is there any chance the valet button is stuck pushed in?

tthis does not have a valet button

First, you need to find out whether it is in valet mode or home valet mode. When you attempt to remote start the next time, watch parking lights flash rate. If it is1 long 2 short, then it is remote / ignition valet mode. If it is 2 short pause 2 short, then it is home valet mode. If it is the latter, you can disable it in the Mode 3, Function 1 Option 2. If it still acts up, I would suggest to take it back for an exchange.

its one long and then 2 short. and i already tried to disable home valet.

Can someone explain to me the need for 2 valet modes?

no idea but that confused me as well.

ok i replaced the module and it fixed the problem. thanks once again