how to activate alpine alarm

Home / the12volt's Install Bay / Car Security and Convenience / how to activate alpine alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

dagoose

Member - Posts: 2

Joined: November 24, 2007

Location: Alberta, Canada

Posted: November 24, 2007 at 9:09 PM / IP Logged

I bought my car (99 civic) from a dealership and it has an Alpine alarm installed. I know nothing about alarms, so I was wondering if someone could helo me out. I found out how to get my alarm in and out of valet mode, and when I push the panic button, the alarm goes off. I don't know how to arm the alarm. I don't know the exact model number, but my remote has 2 buttons on it. Can someone please help?

Thanks

Back to Top

Twelvoltz

Platinum - Posts: 2,384

This member has made a donation to the12volt.com. Click here for more info.

This member consistently provides reliable information

Joined: March 24, 2005

Location: New Jersey, United States

Posted: November 24, 2007 at 9:24 PM / IP Logged

Have a look through the downloads section of this site. There are quite a few Alpine manuals here. Try and identify your particular system using the manuals. This might shed some light on your issues for you.

If you can put it in and out of valet mode it should allow you to arm and disarm as well.

Installer, IT support, and FFL. I need less hobbies.

Back to Top

dagoose

Member - Posts: 2

Joined: November 24, 2007

Location: Alberta, Canada

Posted: November 25, 2007 at 2:02 PM / IP Logged

I just checked it out, and it's a SEC-8447A. There were no manuals on this site for this alarm.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to activate alpine alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.