accele usa pro security rs623rn

Home / the12volt's Install Bay / Car Security and Convenience / accele usa pro security rs623rn (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

think1515

Member - Posts: 2

Joined: August 15, 2006

Location: United States

Posted: November 25, 2007 at 12:02 AM / IP Logged

I just recently bought a vehicle that has a remote starter installed. I couldn’t figure out why the keyless entry wasn’t hooked up and then I noticed that several wires were not hooked.

I want to hook up the keyless entry but I can’t find any literature on this product. I know that I need relays for reverse polarity and I know how to wire it. I just don’t know what wires go to the door lock.

I did a search but couldn’t find anything. Any idea where I can find this or does anyone have this unit that can help me out?

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: November 25, 2007 at 6:26 AM / IP Logged

hey man, i just did a quick google, the remote fobs look like astra key fobs, so heres a link to the pdf of the astra unit. Maybe this is the one. Go to the last page and see if the colours are identicle to the unit you have or the postition of wires. If so look for the lock/unlock and wire it like the link below (unit pinout shown and reverse polarity setup with relay is shown in there as well.)

http://scytek.net/pdf/product_astra_combo_4000RS_manual.pdf

Back to Top

think1515

Member - Posts: 2

Joined: August 15, 2006

Location: United States

Posted: November 25, 2007 at 12:01 PM / IP Logged

I looked at the Astra's also and they are similar but the wire out puts are different. I think I am going to have to test each pin with a volt meter and see. Thanks for your help.

Back to Top

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: November 26, 2007 at 2:51 PM / IP Logged

look on ur unit for 3 wires. Usually lock outputs are 3 wires. 2 negatives and one postive all 500mah outputs only used to power relays. If u have 3 the middle should have constant 12. the out pins one shows neg and other shows negative as well when u lock/unlock. If your unit has 6 wires for lock, the realys built onto board, but from what i know astra units dont offer onlbopard relays. If u have more questions pm or reply in forum. ill be glad to help.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

accele usa pro security rs623rn

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.