valet 712t keyless entry

Home / the12volt's Install Bay / Car Security and Convenience / valet 712t keyless entry (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mojismith

Member - Posts: 2

Joined: November 30, 2007

Location: California, United States

Posted: November 30, 2007 at 2:45 PM / IP Logged

Hello,

I am trying to install a Valet 712T and need help figuring out how to connect the two aftermarket actuators (2 wire). The car is a Toyota tercel, but all of the components are aftermarket since the car comes with no extras. I will not install internal lock switches. Here is how the manual describes each cable:

Red = 12V+, GREEN/ Black = Lock #30 common output, WHITE/ Black = Lock #87 Normally closed, Violet/Black = Lock #87 normally open (input), Blue/Black = Unlock #30 common (output), Violet = Unlock #87 normally open (input), BROWN / Black = Unlock #87A normally closed, Black = ground. Also, Violet/Black and Violet are joined.

Can anyone shine some light on this problem? Thanks for the help.

Back to Top

techman93

Silver - Posts: 591

Joined: October 28, 2006

Location: Pennsylvania, United States

Posted: November 30, 2007 at 2:51 PM / IP Logged

two relays

system is called reversal rest at ground or reverse polarity.

valet 712t keyless entry -- posted image.

The wire I'm test'n isn't doin' what it's supposed to be doin'... I am so glad I printed that tech sheet, with the wrong info.

Do it right the first time... or I might have to fix it for ya

Back to Top

lostissues

Copper - Posts: 103

Joined: March 21, 2007

Location: United States

Posted: November 30, 2007 at 9:43 PM / IP Logged

I think the 712t comes with a 451m built in, so this is my thoughts (Dont take my word about this, wait for someone to confirm this) your purple wire should go to 12 volts, the green and blue (w/black) should go to the actuators, then your white and brown (w/black) should be grounded. again I'm not positive but im pretty sure this is the way to go.

Jonathan

Back to Top

mobile1

Silver - Posts: 479

Joined: February 23, 2004

Location: United States

Posted: November 30, 2007 at 9:51 PM / IP Logged

You are correct Jonathan. GREEN/ Black wire will be lock and the Blue/black wire will be unlock.

Back to Top

mojismith

Member - Posts: 2

Joined: November 30, 2007

Location: California, United States

Posted: December 02, 2007 at 3:16 PM / IP Logged

Thanks a lot Jonathan, it was as you said. I'm going to wire it up today. Thanks again!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

valet 712t keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.